Mr. Jim MacKenzie reports
VISCOUNT IDENTIFIES THREE NEAR-SURFACE GOLD-COPPER PORPHYRY TARGETS AT PASSIFLORA ABOVE 843.9-METRE MINERALIZED INTERCEPT; ROSOR HIGH-RESOLUTION DRONE SURVEY CONFIRMS DISTRICT-SCALE SYSTEM
Viscount Mining Corp. has provided initial observations from a newly completed high-resolution semi-airborne electromagnetic (SAEM) survey conducted by Rosor Exploration Corp. over the Passiflora target at its Silver Cliff project near Westcliffe, Colo., within the historic Silver Cliff mining district. The survey is the third separate line of evidence, after drilling and an earlier survey by Quantec Geoscience, pointing to the same large gold-copper system at Passiflora. Further technical details will be provided in a follow-up release once Rosor and Quantec complete their integrated interpretation.
The Rosor high-density, drone-based survey provides a second, independently derived geophysical data set that confirms the broader conductive system previously identified by Quantec Geoscience's magnetotelluric (MT) survey. Importantly, the new SAEM data further refines the upper portion of that system, resolving three distinct low-resistivity zones within approximately 500 metres of surface. The results add an important new layer of definition to the Passiflora target, where Viscount previously reported 843.9 metres of continuous gold-copper mineralization grading 0.2143 per cent copper equivalent in drill hole PF-23-03A, beginning at approximately 400 metres downhole. The SAEM response is spatially consistent with the area of the previously identified Quantec anomaly and the mineralization encountered in PF-23-03A.
In simple terms, Viscount now has three separate lines of evidence pointing to the same place: drilling, which intersected 843.9 metres of continuous gold-copper mineralization in hole PF-23-03A; Quantec's deep survey, which mapped a large anomaly extending from approximately 400 metres to more than 1,500 metres below surface over an area of six square kilometres; and Rosor's detailed survey, which independently detected the same system and sharpened its upper 500 metres into three distinct conductive zones. These zones will be combined with geology and existing drilling to select the locations of the next drill holes.
Key highlights:
- Independent confirmation of the Passiflora geophysical system: The Rosor SAEM survey, using a different geophysical methodology from the earlier Quantec MT program, independently confirms the broader conductive system previously identified at Passiflora.
- Three distinct high-priority zones identified: Rosor's high-density SAEM program resolves three distinct low-resistivity zones within the upper approximately 500 metres of the Passiflora target area. These features provide substantially more focused areas for geological evaluation and drill targeting within the broader Quantec MT footprint.
- Strong spatial relationship with existing drilling: The Rosor SAEM response is spatially consistent with Viscount's previously reported 843.9-metre drill interval grading 0.2143 per cent copper equivalent (CuEq), beginning at approximately 400 metres downhole -- near the interpreted top of the broader resistivity anomaly.
- Supports the porphyry exploration model: Together with historical and modern drilling demonstrating extensive hydrothermal alteration and gold-copper mineralization, the new geophysical results further support Viscount's interpretation of Passiflora as part of a potentially extensive gold-copper porphyry system.
- Large system remains open at depth: Quantec's prior MT interpretation extends the deeper conductive system from approximately 400 metres to more than 1,500 metres below surface, substantially below the base of PF-23-03A. The SAEM model extends to approximately 500 metres depth and provides greater definition of the upper portion of the target.
- Next-stage targeting: The Rosor SAEM interpretation will be integrated with the Quantec MT program as the two companies are working in tandem to rank the three newly identified zones and work with Viscount geologists to prioritize follow-up drilling at Passiflora.
Significance of the Passiflora drill program
Passiflora is one of the two principal exploration areas at Silver Cliff, alongside the Kate silver resource area. The target has emerged as an important component of the broader Silver Cliff opportunity following Viscount's drilling of PF-23-03A, which intersected 843.9 metres of continuous gold-copper mineralization. Viscount interprets that hole as having tested the peripheral portion of a potentially larger intrusive centre, with mineralization remaining open in multiple directions. Quantec's subsequent MT survey identified a large resistivity anomaly extending from approximately 400 metres to greater than 1,500 metres depth over six square kilometres.
"Independent confirmation from the Rosor SAEM survey is an important technical milestone for Passiflora," said Mark Abrams, director and vice-president of exploration for Viscount Mining. "We now have drilling, the Quantec MT and Rosor SAEM data pointing to a large system at Passiflora. With three discrete zones resolved in the upper portion of that target and 843.9 metres of continuous gold-copper mineralization already intersected at PF-23-03A, our next phase of targeting is much more focused. This is an exciting step forward for Passiflora."
The newly completed Rosor SAEM survey provides an independent geophysical test of that interpretation. Rather than simply reproducing the broader response, the higher-density survey has resolved three discrete low-resistivity zones within the upper approximately 500 metres, giving Viscount more specific features to evaluate within the larger system.
Management views the convergence of drilling, MT and SAEM data as a meaningful step in advancing and derisking the Passiflora exploration model. The company's immediate focus will be to integrate these data sets with geological observations and existing drill information to determine the highest-priority locations for follow-up drilling.
Next steps -- fully financed phase 2 diamond drilling campaign
Viscount is planning a fully financed phase 2 diamond core drilling campaign comprising three deep holes at Passiflora, each planned to approximately 5,000 feet (about 1,500 metres). To optimize drill collar locations, the company is combining Rosor's three targets with Quantec's 3-D MT resistivity inversion model, results from drill hole PF-23-03A, multielement soil geochemistry and surface geological mapping.
The drilling will test promising areas and help determine whether the gold and copper found in PF-23-03A continues toward the interpreted centre of the larger porphyry intrusive complex. Viscount will announce specific drill targets and mobilization schedule once planning is complete.
About the Rosor SAEM drone survey
Viscount retained Rosor Exploration to undertake the high-resolution airborne electromagnetic and magnetic survey at Silver Cliff. The SAEM component reported here combines a ground-based transmitter with a drone-borne receiver to collect closely spaced resistivity data. Between June 4 and June 16, 2026, Mobile Geophysical Technologies GmbH (MGT) operated the SAEM receiver along north-south and east-west flight lines while Rosor provided drone operations and managed the transmitter dipoles.
The Rosor survey program comprised 105 flight lines totalling approximately 190 line kilometres over 3.5 square kilometres. The resulting SAEM data were inverted into 2-D sections and a 3-D resistivity model extending to approximately 500 metres depth.
The Rosor SAEM survey therefore provides detailed definition of the upper portion of the Passiflora target, while Quantec's earlier MT survey provides a deeper geophysical context extending to more than 1,500 metres below surface. The two data sets, together with existing geological and drilling information, will form the basis for ranking the next generation of drill targets at Passiflora.
Dr. Johannes Stoll, chief executive officer of Mobile Geophysical Technologies, commented: "In both models, the caldera appears as a high-resistance body within the top 500 metres below the Earth's surface diameter. The caldera is surrounded by zones with moderate to low electrical resistivities. The size of the high-resistivity inner core of the caldera corresponds well with the circular shape of the caldera. It appears our model indicates the top part of the gold-copper porphyry system, with the massive system indicated by the Quantec MT Titan model continuing beneath 500 metres."
Alex Coutu, chief executive officer of Rosor, said: "We were very pleased with the execution and results of the semi-airborne electromagnetic survey at Silver Cliff. The program produced a high-density data set that resolves coherent resistivity patterns across the Passiflora area and provides Viscount with another valuable layer of information to integrate with its geology, drilling and other geophysical data sets. From a survey performance standpoint, the program achieved what we set out to accomplish. It was a pleasure working on this project and our team looks forward to the upcoming drill program and results."
Qualified person
The scientific and technical information contained in this news release has been reviewed and approved by Harald Hoegberg, CPG, an independent consulting geologist who is a qualified person as such term is defined under National Instrument 43-101, Standards of Disclosure for Mineral Projects.
About Viscount Mining Corp.
Viscount Mining is a mineral exploration company focused on advancing silver, gold and copper projects in the Western United States. The company's portfolio includes the Silver Cliff project in Colorado, which hosts the National Instrument 43-101 Kate silver resource and the Passiflora copper-gold porphyry target, and the 100-per-cent-controlled Cherry Creek project in Nevada, a historic multimetal district with more than 20 past-producing mines.
We seek Safe Harbor.
© 2026 Canjex Publishing Ltd. All rights reserved.