(via TheNewswire)
Vancouver, British Columbia – November 12, 2026 – TheNewswire - Cascade Copper Corp . (CSE: “CASC”/FRA: 91O ) (“ Cascade ” or the “ Company ”) is pleased to announce it has received the results of a drill core resampling exercise from the late summer field season.
What:
Four readily available sections from historic holes validated and quartered for assay,
Sampling confirms previous high grade results from historic drilling in 2006 and 2008.
When:
Significance:
The 100% owned Copper-Plateau Project (the “Project ”) (*no NSR ) is road accessible, approximately 2,789 ha and 40km due east of the Copper Mountain Mine (TSX:HBM ). The Project benefits from exposure to molybdenum, gold and of course, copper.
Next Steps:
IP survey over historic zones of interest,
Receipt of diamond drill permit to validate historic holes and expand known zones of mineralization.
Shannon Baird, Cascade’s Vice President of Exploration remarks; “ We were fortunate to have access to t he vast majority of the historic drill core from the Copper Plateau project and that we were able to resample intervals through quartering . The resampling results are quite comparable to the original numbers and this gives us added confidence to rely on these historic numbers for further drill planning. Drill intervals were selected by ease of access and order of the existing loaded pallets; future re-sampling will require greater manpower to sort through the pallets of core and organize core boxes in advance for validation and subsequent cutting. ”
Click Image To View Full Size
Figure 1 : Example Historic Core Prior to Resampling
Table 1 : Highlights of resampling sections of four holes from historic core at Copper Plateau
Click Image To View Full Size
*CuEq values are calculated using the following commodity prices and recovery factors:$5.00 Cu, $3750 Au, $50 Ag, $40 Mo and 90% recovery for Cu, 65% recovery for Au, 70% recovery for Ag and 65% for Mo (values from similar porphyry deposits in south Central BC), Using those values the CuEq% = Cu% + Au g/t x 0.710938 + Ag g/t x 0.010208 +Mo % x 5.2
Figure 2 : Example of Historic Core From Hole IS06-10 Prior to Resampling by Quartering
Figure 3 : Example Core Prior to Quartering
Figure 4 : Example Core Prior to Quartering
Project Location
The Copper Plateau Porphyry project is located in south-central British Columbia, between Penticton and Princeton. It is situated south of the former Brenda Copper Mine, which produced 177 million tonnes of ore grading 0.169% Cu and 0.043% Mo between 1970 and 1990 3 . The geological setting is within the Quesnel Terrane which hosts Copper Mountain southwest of Copper Plateau and Teck’s Highland Valley Copper Mine to the northwest. Kodiak Copper’s MPD project lies 40km west of the Project.
Click Image To View Full Size
¹: Teck Resources AIF 2024 (https://www.teck.com/media/AIF-2025.pdf)
²: Copper Mountain Website (https://hudbayminerals.com/investors/reserves-and-resources/default.aspx)
³:Copper Deposits of the NW Cordilleran. CIM Spec. Vol 46
⁴: Kodiak Copper Website (https://kodiakcoppercorp.com/kodiak-reaches-key-milestone-with-initial-mineral-resource-estimate-at-the-mpd-copper-gold-project)
5 Nicola Website (https://nicolamining.com/projects-and-operations/projects/new-craigmont-copper-project)
Drill Sample Analysis QA/QC Protocol
Historic core boxes were laid out and re-measured based on depth markers and historic sample tags. Core logs were compared to core boxes to ensure mineralization matched the historic records. Sample lengths were measured and marked. Core was sawn by a core cutter along the long axis, with the left quarter side consistently being placed back in the core box as residual reference material and the other being placed in a sample bag for the interval. Sample intervals were sealed and placed in labelled rice bags in groups of ten. All labelled rice bags were sealed under the supervision of the QP and couriered to Actlabs, a fully accredited lab located in Kamloops, BC.
The analysis methods at Activation Laboratories, a fully accredited laboratory, located in Kamloops British Columbia, consist of a 4-acid near total digestion with Ultra Trace element ICP-MS and ICP-OES technique. Any over-limits above 10,000 ppm (1.0%) on copper will be run with their standard 4-Acid ICP-OES protocol. Gold analysis will be done by 30g fire assay with Atomic Absorption finish.
The Qualified Person responsible for the technical content of this press release is Shannon Baird, P.Geo, Vice President Exploration of Cascade Copper Corp.
About Cascade Copper
Cascade Copper is an exploration stage natural resource company engaged in the evaluation, acquisition, and exploration of copper based mineral resource properties. Cascade is focused on copper and gold, porphyry and mesothermal gold deposits in British Columbia and VMS and IF copper, gold, and silver style deposits in Ontario. Cascade’s priority is to conduct exploration using modern technology that includes 3D inversion modelling of geophysics, LiDAR elevation models, and AI enhanced Predictive Modelling from all historic and modern data inputs. Drilling is planned on several of its copper-gold targets this year. Cascade has five projects, including the Copper Plateau Copper-Moly Project, the Centrefire Copper-Gold Project, the Rogers Creek Copper-Gold Project, the Fire Mountain Copper-Gold Project, and the Bendor Gold-Tungsten Project.
FOR FURTHER INFORMATION, PLEASE CONTACT:
CASCADE COPPER CORP.
Jeffrey S. Ackert, President and CEO
820-1130 West Pender St.
Vancouver, BC V6E 4A4
Telephone: 1 613 851 7699
E-Mail: info@cascadecopper.com
Web: www.cascadecopper.com
Neither the CSE nor its Regulation Services Provider (as that term is defined in the policies of the CSE) accepts responsibility for the adequacy or accuracy of this release.
DISCLAIMER & FORWARD-LOOKING STATEMENTS
This news release includes certain “forward-looking statements” which are not comprised of historical facts. Forward-looking statements are based on assumptions and address future events and conditions, and by their very nature involve inherent risks and uncertainties. Although these statements are based on currently available information, Cascade Copper Corp. provides no assurance that actual results will meet management’s expectations. Factors which cause results to differ materially are set out in the Company’s documents filed on SEDAR. Undue reliance should not be placed on “forward looking statements.”
Copyright (c) 2026 TheNewswire - All rights reserved.
© 2026 Canjex Publishing Ltd. All rights reserved.