11:19:10 EST Mon 16 Nov 2026
Enter Symbol
or Name
USA
CA



Playfair Mining Ltd (3)
Symbol PLY
Shares Issued 88,503,395
Close 2026-11-13 C$ 0.04
Market Cap C$ 3,540,136
Recent Sedar+ Documents

Playfair drills 48 m of 0.609 g/t Au at Mount Uniacke

2026-11-16 09:08 ET - News Release

Mr. Donald Moore reports

PLAYFAIR HITS GOLD AT MOUNT UNIACKE PROPERTY

Playfair Mining Ltd. has completed 2,611 metres of core drilling at its Mount Uniacke property and is pleased to report gold assays received to date. Results remain pending from seven of the 23 holes.

Highlights

Playfair successfully targeted and intersected two significant new subsurface gold discoveries. In the Open Cut area, drill hole MU26-12 reports a wide, continuous zone of 0.609 gram per tonne gold over 48 metres from 25.0 metres to 73.0 metres, including 21.0 metres from 28.0 metres to 49.0 metres grading 0.977 g/t gold.

Drill hole MU26-13 in the Central Crossing area encountered three intercepts showing individual high-grade intervals grading up to 40.74 g/t gold. From 20.2 metres to 23.75 metres, a length of 3.55 metres reported 2.588 g/t gold. A 2.1-metre section assayed 14.943 g/t gold from 48.0 metres to 50.1 metres. The 1.8-metre section from 66.7 metres to 68.5 metres graded 7.194 g/t gold.

Don Moore, Playfair's chief executive officer, stated: "Plain and simple. Two new gold discoveries to date within our Mount Uniacke gold property. Stay tuned for the rest of our drill results. The game is on."

Drill program and results

Playfair's 2026 drill program at Mount Uniacke was focused in three areas. The Open Cut area was interpreted to have potential for the occurrence of wide, bulk-tonnage-type gold zones. The West Lake Mine and Central Crossing areas were interpreted to have high-grade vein-related gold potential.

Both the Open Cut and Central Crossing areas yielded excellent results, and additional drilling will be required to expand the new discoveries along strike and to depth. Results at the West Lake Mine area, drilled in a very tight pattern to test the crumple theory were disappointing, though 2-D and 3-D structural interpretation of the new core holes is planned to further assess the plunge and spatial position relative to the historical mineralization.

Drill core processing, data verification and quality assurance/quality control program (QA/QC)

Once received from the drill, delivered to the core processing facility by the project geologist and logged, selected drill core samples were split in half by hydraulic splitter, labelled and bagged for ground transport to MSALABS Inc. The remaining drill core was securely stored. Certified OREAS reference standards and blanks and two types of duplicates (quarter-core split by Playfair and nominal minus-two-millimetre rejects riffle split by MSALABS) are inserted into the sample stream at regular intervals, approximately one CRM (certified reference material) control sample, one duplicate and one CRM blank per 20 samples to monitor analytical accuracy and precision, in addition to the laboratory's internal quality assurance programs. The company's QA/QC program was overseen by Greg Davison, PGeo, and Perry MacKinnon, PGeo, both qualified persons as defined by National Instrument 43-101.

The data verification process involved a multistep approach to ensure accuracy and integrity. This included a detailed quality control (QC) analysis of the data. These QC checks involved the analysis of CRMs, blanks, and duplicates to confirm the reliability of the assay results. All samples and CRMs submitted for PhotonAssay analysis are retained for additional analysis by other techniques or third party check sampling. The company's qualified persons believe that the sampling documentation, analytical protocols and quantitative data received to date will withstand scrutiny for inclusion.

Drill core samples were submitted to MSALABS' analytical facility in Grand Falls-Windsor, Nfld., for sample preparation and PhotonAssay analysis. The MSALABS facilities are accredited to the international standards ISO/IEC 17025 and ISO 9001 for gold and multielement assays, with all analytical methods incorporating quality control materials at defined frequencies and established data acceptance criteria. MSALABS is independent of the company. MSALABS includes and reports its internal CRM data inserted for each batch of the company's samples.

PhotonAssay

The PhotonAssay method utilizes gamma ray analysis for gold detection using the Chrysos PhotonAssay instrument (PA1408X). This non-destructive, fully automated technique offers high accuracy for analyzing ores and pulps. Sample preparation begins with drying and crushing up to one kilogram of material to achieve at least 70 per cent passing through a two-millimetre sieve. The sample is then riffle split to obtain a suitable aliquot for two testing cycles (MSALABS method CPA-Au1). The PhotonAssay instrument bombards 350- to 500-gram samples contained in sealed containers with gamma rays. The method offers a gold detection range from 0.015 part per million (lower limit) to 10,000 part per million (upper limit). Reported intervals are calculated using length-weighted average grades. To reflect continuity within the broader mineralized system, up to seven metres of consecutive internal dilution below a cutoff of 0.1 g/t is included within selected composites. Reported assays are uncut and no top cut has been applied. All intervals are reported as downhole core lengths. True widths are currently unknown as the geometry of the mineralized zones is still being defined.

The technical contents of this release were reviewed and approved by Greg Davison, PGeo, a qualified person as defined by National Instrument 43-101.

We seek Safe Harbor.

© 2026 Canjex Publishing Ltd. All rights reserved.