11:19:13 EST Mon 16 Nov 2026
Enter Symbol
or Name
USA
CA



South Atlantic Gold Inc.
Symbol SAO
Shares Issued 209,073,166
Close 2026-11-12 C$ 0.055
Market Cap C$ 11,499,024
Recent Sedar+ Documents

ORIGINAL: South Atlantic Gold: Results from 11 Holes at Pedra Branca, Brazil, Led by 5.35 m @ 4.78 g/t Au from Mirador

2026-11-16 06:30 ET - News Release

(via TheNewswire)

South Atlantic Gold Inc.

Mirador hole 26DDMIR001 returned 5.35 m @ 4.78 g/t Au from 5.55 m , within which 2.95 m @ 7.51 g/t Au from 7.00 m. Queimadas hole 26DDQUE010 returned 29.25 m @ 0.98 g/t Au from 19.50 m . Igrejinha hole 26DDIGR002 returned 3.00 m @ 0.71 g/t Au from 28.00 m and 1.00 m @ 3.07 g/t Au from 56.00 m . Queimadas, Igrejinha and Mirador have now all returned gold in the current program.

Highlights

  • Mirador. Every sample in the interval of 26DDMIR001 is at or above 0.40 g/t Au, and more assays are to come from the hole. Hole 26DDMIR005, approximately 90 m to the southwest, returned 2.10 m @ 3.43 g/t Au from 19.15 m, including 1.10 m @ 6.40 g/t Au (Figure 1).  

  • Queimadas. Hole 26DDQUE010 returned a second zone of 14.10 m @ 0.84 g/t Au from 65.10 m, including 6.00 m @ 1.77 g/t Au , within which 1.00 m @ 8.49 g/t Au  

  • Igrejinha. The 3.00 m interval in hole 26DDIGR002 starts directly below core that is still to be assayed. The first Igrejinha result, 6.55 m @ 2.28 g/t Au in 26DDIGR005, was reported on October 15, 2026, from the first diamond drilling at Igrejinha.  

  • Still to come. Assays are pending for more than a third of the program’s drilled core , from 29 of the 45 holes, and the updated Mineral Resource estimate (NI 43-101) is underway.  

 

Kelowna, British Columbia, November 16, 2026 – TheNewswire - South Atlantic Gold Inc. (TSX-V: SAO) (the “Company” or “South Atlantic Gold”) is pleased to report the first assay results from the Mirador target and additional results from Queimadas and Igrejinha, at the 100%-owned Pedra Branca Gold Project (the “Project”) in Ceará State, northeast Brazil.

Pedra Branca is a district-scale land position: over 52,000 hectares on the Troia greenstone belt in the Ceará Central Domain, with nine gold targets described in the 2021 technical report. Three of these targets, Queimadas, Igrejinha and Mirador, host an Inferred Mineral Resource of 4.0 million tonnes grading 1.38 g/t Au at a 0.40 g/t Au cut-off, for approximately 180,000 ounces of gold (see “Mineral Resource” below).

The current drill program was designed to further test Queimadas, including for extensions of the known mineralization along strike and at depth, to drill the first diamond holes at Igrejinha , and to drill Mirador. The Company has drilled 45 holes for 5,003.55 m (25 Queimadas, 13 Igrejinha, 7 Mirador).

This release reports results from eleven holes, with intervals from seven of them: three at Mirador, three at Queimadas and one at Igrejinha (Figure 1). Table 1 lists these intervals.


Click Image To View Full Size

Figure 1 – Pedra Branca Gold Project: highlight intervals from this release at Igrejinha (26DDIGR002), Queimadas (26DDQUE010 and 26DDQUE011) and Mirador (26DDMIR001, 26DDMIR002 and 26DDMIR005), with 26DDIGR005 and 26DDQUE009 from the October 15, 2026 release for reference and selected earlier results at six target areas (source keys on the map). This release reports eleven holes: Table 1 lists the intervals from the seven that returned them (26DDQUE012 has no callout), and note 4 covers the other four. Callouts are not a complete list, and earlier results are selected examples, not representative of all results at each target. 2026 composites use a 0.10 g/t Au threshold, with included intervals at 0.40 g/t Au; several highlighted intervals take much of their grade from one or two samples (detail for this release in Table 1). Bold marks intervals above 0.9 g/t Au and is not a cut-off grade. 26DDIGR002, 26DDIGR005 and 26DDMIR001 are partly assayed. Intervals are downhole lengths; true widths are not known. Trench results are from surface channel samples and may not be representative of the mineralization. Magnetics inside the 32 mineral rights (ANM SIGMINE) are for geological context only: the regional airborne survey (total field, Company compilation) and, inside the dashed outline, the Company’s UAV survey as VRMI (D. McInnes, 2026), levelled to the regional survey. Relief: Copernicus DEM GLO-30, ESA/EU. UTM Zone 24 South, SIRGAS 2000.

Comment from the President and CEO

Douglas Meirelles, President and CEO, commented: “We started the year with three questions, one for each of our resource targets. Does the gold at Igrejinha continue below the trenches? What will further drilling identify at Queimadas? And what does Mirador hold near surface? These questions are being answered as assay results arrive. In October, drilling at Igrejinha identified a gold-bearing vein beneath the trenches. At Queimadas, a new drill hole intersected two separate gold zones: 29.25 m @ 0.98 g/t Au from 19.50 m and 14.10 m @ 0.84 g/t Au from 65.10 m. At Mirador, our highest-grade resource target, the first hole returned 5.35 m @ 4.78 g/t Au from near surface.”

Mr. Meirelles added: “These three targets currently hold our entire resource to date, and this program was designed to test them further. As we add to the success of the story, the results are being consolidated into the updated Mineral Resource estimate now underway. In addition, it’s important to highlight that we must always keep an eye on the other potential targets and the sheer size of the asset. The interpretation of our known gold deposits will enhance our ability to better understand regional surface exploration results in the less-explored areas of the Project. The concept of potentially having multiple targets similar to what we already have is compelling for our company. So far, more than a third of the drilled core is still to be assayed.”

Mirador Target

Mirador, the highest-grade resource target (Table 29 of the 2021 technical report), lies approximately 8 km southwest of Queimadas. Seven diamond holes for 388.10 m have been drilled at Mirador in the current program. In the first assays, reported here, 26DDMIR001 and 26DDMIR002 both returned gold from near surface .

Hole 26DDMIR001 intersected 5.35 m @ 4.78 g/t Au from 5.55 m, within which 2.95 m @ 7.51 g/t Au in four consecutive samples of 6.39, 7.60, 10.64 and 5.08 g/t Au (Figure 1). Every sample in the 5.35 m interval grades at least 0.40 g/t Au , and more of the hole is still to be sampled and assayed.

Hole 26DDMIR002 intersected 3.15 m @ 0.43 g/t Au from the collar, including 1.25 m @ 0.93 g/t Au . Hole 26DDMIR005, situated approximately 45 m southwest of 26DDMIR002 and 90 m southwest of 26DDMIR001, intersected 2.10 m @ 3.43 g/t Au from 19.15 m, including 1.10 m @ 6.40 g/t Au .

Queimadas Target

Queimadas (previously called “Coelho-Queimadas”) is the largest of the three resource targets (Table 29 of the 2021 technical report). Twenty-five holes for 3,512.20 m have been drilled there in the current drill campaign, and results have been received in full for ten of them. Specifically for this press release, we would like to highlight two of them:

Hole 26DDQUE010, collared approximately 125 m west of 26DDQUE009, intersected 29.25 m @ 0.98 g/t Au from 19.50 m, including 12.85 m @ 1.21 g/t Au , within which 1.80 m @ 2.76 g/t Au (Figure 1). A second zone returned 14.10 m @ 0.84 g/t Au from 65.10 m, including 6.00 m @ 1.77 g/t Au , within which 1.00 m @ 8.49 g/t Au .

Hole 26DDQUE011, collared approximately 70 m north of 26DDQUE004, intersected 7.00 m @ 0.53 g/t Au from 63.00 m, including 3.20 m @ 0.96 g/t Au , and 9.00 m @ 0.47 g/t Au from 74.00 m, including 6.00 m @ 0.65 g/t Au .

Igrejinha Target

Igrejinha lies approximately 3 km north of the Queimadas drilling. The Company has drilled 13 holes for 1,103.25 m on the target, the first diamond drilling at Igrejinha , and more assays are to come from all 13 holes.

New assays from hole 26DDIGR002 returned 3.00 m @ 0.71 g/t Au from 28.00 m, including 1.00 m @ 1.84 g/t Au , and 1.00 m @ 3.07 g/t Au from 56.00 m (Figure 1). The 28.00 m to 31.00 m interval starts directly below core, from 12.05 m to 28.00 m, that is still to be assayed.

Hole 26DDIGR002 follows the first Igrejinha results, reported on October 15, 2026, when hole 26DDIGR005 returned 6.55 m @ 2.28 g/t Au from 35.00 m beneath trench PBTR009, in a gold-bearing quartz vein.

Orientation of the Mineralization

Drill intercepts indicate that the mineralized lenses at Queimadas, Mirador and Igrejinha strike north to northeast and dip approximately 40 to 50 degrees to the southeast . At Igrejinha, fold axes and vein intersections measured at surface during the Company’s structural review plunge moderately to steeply to the east, close to the dip direction.

Next Steps

NI 43-101 Mineral Resource update . The Company has engaged independent consultants GE21 to prepare an updated Mineral Resource estimate and NI 43-101 technical report for the Project, in coordination with the Company’s Qualified Person.

Regional work . The Company is continuing geophysical modelling, surface mapping and interpretation to test whether the style of mineralization seen at our current resource recurs elsewhere on the Project. Interpretation is at an early stage, and additional surface work and a drone survey will most likely be required.

Cachoeirinha and Barra Nova . Initial geological mapping has been completed over the target grids at Cachoeirinha and Barra Nova, approximately 23 km and 14 km south-southwest of Queimadas, respectively. Two new trenches have been mapped and sampled at Cachoeirinha, and their results are pending. At Barra Nova, where the 2021 trench PBTR047 returned 3.0 m @ 32.63 g/t Au , including 1.0 m @ 96.04 g/t Au, in surface channel samples (news release of May 6, 2022), a new trench, 26TRBNO001 (166.00 m), designed to cross a northwest-trending structure mapped as a fold zone, has been excavated and is being mapped ahead of sampling.

More assays. Results from the current program are arriving from the laboratory.

  

Table 1: Reported Drill Intervals

All intervals are downhole lengths, and true widths are not yet known. Composites are calculated at a threshold of 0.10 g/t Au and included intervals at a threshold of 0.40 g/t Au, as described under “Sample Collection, Assaying and Data Management”, using the first reported value where the laboratory reported repeats. Table 1 lists the seven holes with intervals reported in this release.

Hole

Target

From (m)

To (m)

Length (m)

Au (g/t)

Note

26DDQUE010

Queimadas

19.50

48.75

29.25

0.98

hole length 120.50 m; fully assayed; laboratory repeats on the 41.60 to 42.60 m sample (possible free gold)

including

 

19.50

32.35

12.85

1.21

 

within which

 

26.65

28.45

1.80

2.76

two consecutive samples above 2 g/t Au

26DDQUE010

Queimadas

53.80

61.45

7.65

0.21

 

including

 

53.80

54.45

0.65

0.43

 

including

 

58.60

59.45

0.85

1.01

 

26DDQUE010

Queimadas

65.10

79.20

14.10

0.84

one sample is about 72% of the gram-metres; remaining 13.10 m average about 0.26 g/t Au

including

 

65.10

71.10

6.00

1.77

the 8.49 g/t Au sample is about 80% of the gram-metres; remaining 5.00 m average about 0.43 g/t Au

within which

 

70.10

71.10

1.00

8.49

single sample; laboratory repeat 7.72 g/t Au; first value used

26DDQUE011

Queimadas

3.85

6.30

2.45

0.17

 

26DDQUE011

Queimadas

63.00

70.00

7.00

0.53

hole length 133.10 m; fully assayed

including

 

64.00

67.20

3.20

0.96

 

26DDQUE011

Queimadas

74.00

83.00

9.00

0.47

 

including

 

77.00

83.00

6.00

0.65

 

26DDQUE011

Queimadas

94.00

96.00

2.00

0.22

one sample is about 75% of the gram-metres

26DDQUE012

Queimadas

7.80

11.20

3.40

0.12

hole length 76.15 m; fully assayed

26DDQUE012

Queimadas

13.40

17.00

3.60

0.14

 

26DDIGR002

Igrejinha

28.00

31.00

3.00

0.71

partly assayed (note 6); the 1.84 g/t Au sample is about 87% of the gram-metres

including

 

30.00

31.00

1.00

1.84

single sample

26DDIGR002

Igrejinha

56.00

57.00

1.00

3.07

single sample of 2 g/t Au or more; no repeat; adjacent samples below 0.01 g/t Au; partly assayed

26DDMIR001

Mirador

0.00

3.40

3.40

0.13

partly assayed; two samples of 0.21 and 0.26 g/t Au

26DDMIR001

Mirador

5.55

10.90

5.35

4.78

partly assayed (note 6); every sample at least 0.40 g/t Au

within which

 

5.55

6.25

0.70

2.66

single sample above 2 g/t Au

within which

 

7.00

9.95

2.95

7.51

four consecutive samples above 2 g/t Au

26DDMIR002

Mirador

0.00

3.15

3.15

0.43

hole length 79.75 m; fully assayed

including

 

1.90

3.15

1.25

0.93

 

26DDMIR005

Mirador

19.15

21.25

2.10

3.43

hole length 35.95 m; fully assayed; one sample is about 98% of the gram-metres; remaining 1.00 m grades 0.16 g/t Au

including

 

20.15

21.25

1.10

6.40

single sample; no laboratory repeat

Notes:

1. The assay data were obtained directly from the electronic files provided by SGS GEOSOL and were cross-checked by the Company against the original laboratory certificates in PDF format. The Qualified Person (QP) reviewed the mineralized intercepts.

2. Internal quality assurance and quality control (QA/QC) reviews were conducted on a batch-by-batch basis, including individual checks of blanks, duplicates, and certified reference materials (standards).

3. Samples were analyzed by SGS GEOSOL in Vespasiano, Minas Gerais, Brazil, using analytical method FAA313, with gold results reported in the laboratory certificates in parts per billion (ppb; Au_ppb). The assay results presented in Table 1 were converted from ppb to grams per tonne (g/t) by dividing the reported values by 1,000 (1,000 ppb = 1 g/t). Minor discrepancies may occur due to rounding to the displayed number of decimal places.

4. 26DDMIR003, 26DDMIR004, 26DDMIR006 and 26DDMIR007, all fully assayed, returned no interval to report. In 26DDMIR006, 1.60 m @ 0.27 g/t Au from 22.05 m is shorter than the 2 m minimum length of a composite.

5. 26DDQUE011 and 26DDQUE012 are fully assayed, and Table 1 lists every interval in them.

6. 26DDIGR002 and 26DDMIR001 are partly assayed. Core not yet assayed: in 26DDIGR002, 0.00 to 5.00 m, 12.05 to 28.00 m and 101.00 to 111.85 m; in 26DDMIR001, 15.70 to 26.00 m, 34.00 to 48.00 m, 57.75 to 71.00 m and 76.00 to 77.60 m. Unassayed intervals are untested and should not be interpreted as barren. 26DDQUE013, partly assayed, will be reported when its assays are complete. Results for the other holes of the program reported to date are in the news release of October 15, 2026 or earlier.

Table 2: Drill-Hole Collars

Coordinates are UTM Zone 24 South, SIRGAS 2000 datum. * Planned azimuth and dip, where no downhole survey of the hole itself is yet in the database. Table 2 lists the seven holes in Table 1 and 26DDMIR003, 26DDMIR004, 26DDMIR006 and 26DDMIR007. The collars of the other holes of the program are listed in the news release of October 15, 2026.

Hole

Target

Easting (UTM)

Northing (UTM)

Elev. (m)

Azimuth

Dip

Length (m)

Status

26DDQUE010

Queimadas

385,051.82

9,400,568.16

598.19

306.26

-54.87

120.50

reported

26DDQUE011

Queimadas

384,851.33

9,400,217.45

598.59

316.81

-54.55

133.10

reported

26DDQUE012

Queimadas

384,799.14

9,400,266.78

599.73

315.75

-55.18

76.15

reported

26DDIGR002

Igrejinha

385,306.20

9,403,033.98

563.31

316.21

-54.24

111.85

reported in part

26DDMIR001

Mirador

380,329.44

9,393,702.90

558.60

314.77

-53.03

77.60

reported in part

26DDMIR002

Mirador

380,309.49

9,393,655.04

559.81

315.00*

-55.00*

79.75

reported

26DDMIR003

Mirador

380,420.26

9,393,572.47

548.22

318.15

-53.72

74.60

reported

26DDMIR004

Mirador

380,254.86

9,393,648.15

561.16

315.21

-55.90

30.95

reported

26DDMIR005

Mirador

380,275.11

9,393,627.85

560.27

315.00*

-55.00*

35.95

reported

26DDMIR006

Mirador

380,423.45

9,393,573.13

548.38

291.26

-53.85

40.50

reported

26DDMIR007

Mirador

380,305.29

9,393,579.69

556.60

251.09

-54.34

48.75

reported

Correction to Table 2 of the news release of October 15, 2026. The azimuth and dip shown for 26DDMIR005 (315.21 and -55.90) were those of 26DDMIR004; the planned values for 26DDMIR005 are 315.00* and -55.00*. The azimuth and dip shown for 26DDQUE025 (305.00 and -55.00) are planned values, and its downhole survey is not yet in the database.

Sample Collection, Assaying and Data Management

Composites are length-weighted and calculated at a 0.10 g/t Au threshold, with a minimum length of 2 m and a maximum of 2 m of consecutive internal dilution. Included intervals are calculated at a 0.40 g/t Au threshold, the cut-off grade of the 2021 Inferred Mineral Resource estimate, and are reported where they grade above the enclosing composite. Intervals above 2 g/t Au within included intervals are also reported, as are single samples of 2 g/t Au or more outside composites. Gold grades are uncapped. Where the laboratory reported repeat determinations, the QP has used the first reported value. The 0.10 g/t Au and 0.40 g/t Au thresholds are reporting criteria only and do not imply Mineral Resource classification or economic significance.

Drill core is HQ2 in diameter in oxide and friable to semi-compact materials, reducing to NQ2 in compact materials. Downhole surveys are run by the drilling contractor with a north-seeking gyroscopic tool. The core is logged, photographed, cut and sampled by the Company’s field team, in samples nominally 1.0 m long downhole, adjusted to geological contacts and to changes in mineralization or alteration. Core recovery averaged 99.8% across the program. Samples are delivered to SGS GEOSOL Laboratórios S.A., a laboratory independent of the Company and certified to ISO 9001:2015 and ISO 14001:2015, in Goiânia, Goiás, for preparation, and the pulps are sent to its laboratory in Vespasiano, Minas Gerais, Brazil, for analysis. Samples are dried, crushed to 75% passing 3 mm, riffle split (250 g) and pulverized to 95% passing 150 mesh. Gold is determined by fire assay on a 30 g charge with an atomic absorption finish (detection limit 0.01 g/t Au).

Quality control. The Company inserts certified reference materials, blanks and field duplicates into the sample stream. Results have been received for 122 certified reference materials, 124 blanks and 132 field duplicates . The 30 reference materials in the batches added since October 15, 2026 returned values between 5.5% below and 8.8% above their certified values, and blanks in these batches returned less than 0.01 g/t Au. Field duplicates in these batches showed no gross mismatch, and the three pairs at or above 0.10 g/t Au differ by 11.4%, 14.6% and 13.7%. The four reference-material results and the duplicate pair in hole 26DDQUE006 described in the news release of October 15, 2026 were referred to the laboratory for investigation, and the Company will decide on any re-assaying when the investigation is complete.

Coarse gold and repeat determinations. For some samples, the laboratory reported widely varying repeat fire assay determinations, which it attributes to the possible presence of free gold. In this release, this applies to one sample in the 19.50 m to 48.75 m interval in hole 26DDQUE010 (the 41.60 m to 42.60 m sample, with determinations of 1.46, 0.90 and 1.81 g/t Au) and to one sample in hole 26DDMIR001 outside the reported intervals (54.00 m to 55.20 m, with determinations of 0.30, 0.21 and 0.64 g/t Au). The variability may reflect a coarse-gold (nugget) effect and adds uncertainty to individual determinations. No screen-metallic or gravimetric check assays have yet been performed.

Single-sample contributions. The 8.49 g/t Au sample in hole 26DDQUE010 accounts for approximately 72% of the gram-metres in the 14.10 m interval. The 1.84 g/t Au sample in hole 26DDIGR002 accounts for approximately 87% of the gram-metres in the 3.00 m interval, and the 6.40 g/t Au sample in hole 26DDMIR005 accounts for approximately 98% of the gram-metres in the 2.10 m interval. The 1.84 g/t Au and 3.07 g/t Au samples in hole 26DDIGR002 and the 6.40 g/t Au sample in hole 26DDMIR005 are single determinations with no laboratory repeat. In hole 26DDIGR005, reported on October 15, 2026, the 1.00 m sample grading 12.75 g/t Au accounts for approximately 85% of the gram-metres in the 6.55 m interval.

Trenches. Trench results are from surface channel samples and may not be representative of the mineralization. Trench lengths are channel lengths, and true widths are not known.

Geophysics. The Company is comparing the Queimadas assays, as they are received, with its October 2026 induced polarization (“IP”) and magnetic models. The news release of October 15, 2026 stated that early results suggest gold mineralization may be focused where the IP anomalies coincide with highly magnetic mafic rocks. The assays reported here show that gold at Queimadas also occurs outside that setting, and they do not confirm the pattern. The 29.25 m interval in 26DDQUE010 lies in weakly chargeable ground, about 110 m from the nearest modelled magnetic rock. The Company will continue the comparison as the remaining Queimadas assays are received, and does not yet regard chargeability or magnetics as a reliable pointer to gold at Queimadas.

Mineral Resource

The Project hosts an Inferred Mineral Resource of 4.0 million tonnes grading 1.38 g/t Au, containing approximately 180,000 ounces of gold, at a 0.40 g/t Au cut-off grade . The Mineral Resource was estimated in accordance with the CIM Definition Standards and is disclosed under NI 43-101 in the technical report titled “NI 43-101 Technical Report, Mineral Resource Estimation for the Pedra Branca Gold Project, Ceará State, Brazil,” with an effective date of March 16, 2021. The report was prepared by Rodrigo Mello, FAusIMM, of RBM Consultoria Mineral, an independent Qualified Person, and is available under the Company’s profile on SEDAR+ at www.sedarplus.ca. The Mineral Resource is defined by 90 diamond holes averaging 99 m in length, 67 reverse-circulation holes averaging 38 m in length and 25 trenches. Until the updated estimate described under “Next Steps” is published, this remains the Mineral Resource for the Project.

An Inferred Mineral Resource has a lower level of confidence than an Indicated Mineral Resource, must not be converted to a Mineral Reserve, does not have demonstrated economic viability, and there is no certainty that all or any part of it will be upgraded to a higher category. The drill results reported in this news release have not been incorporated into the Mineral Resource estimate. They do not establish continuity or a plunge of mineralization and do not demonstrate an extension of the Mineral Resource or economic viability. The Cachoeirinha and Barra Nova targets are not part of the Mineral Resource.

Qualified Person

All scientific and technical information in this news release, other than the 2021 Mineral Resource estimate prepared by RBM Consultoria Mineral, has been reviewed and approved by Marcelo Antonio Batelochi, P.Geo., MAusIMM (CP), Senior Vice-President, Exploration of South Atlantic Gold, and a Qualified Person under National Instrument 43-101 – Standards of Disclosure for Mineral Projects. Mr. Batelochi is not independent of the Company. Mr. Batelochi has verified the data disclosed in this news release, including checking the assay results in Table 1 against the original laboratory certificates and reviewing the quality-control results. The four reference-material results noted under “Sample Collection, Assaying and Data Management” were referred to the laboratory for investigation, and no check assays have yet been performed on samples with possible free gold. The QP has been working in coordination with the independent Qualified Persons of GE21, who are undertaking a review of the project database, including the QA/QC results, in support of an ongoing Mineral Resource update.

About South Atlantic Gold Inc.

South Atlantic Gold is an exploration company advancing the 100%-owned Pedra Branca Gold Project in Ceará State, northeast Brazil. The Project covers over 52,000 hectares and hosts an Inferred Mineral Resource of 4.0 million tonnes grading 1.38 g/t Au at a 0.40 g/t Au cut-off, for approximately 180,000 ounces of gold, at three targets, Queimadas, Igrejinha and Mirador (NI 43-101 technical report effective March 16, 2021; Qualified Person: Rodrigo Mello, FAusIMM). The Company is listed on the TSX Venture Exchange under the symbol “SAO”. Additional information is available on SEDAR+ (www.sedarplus.ca) and on the Company’s website (www.southatlanticgold.com).

For further information, please contact:
SOUTH ATLANTIC GOLD INC.
Douglas Meirelles, President and CEO
E: ir@southatlanticgold.com
T: 250-762-5777

Cautionary Statement on Forward-Looking Information

All statements, other than statements of historical fact, contained in this news release constitute “forward-looking information” within the meaning of applicable Canadian securities laws. Forward-looking information in this news release includes, without limitation, statements regarding the timing and outcome of pending drill-core assays and of the sampling of unsampled core, the timing of the sampling of trench 26TRBNO001, the reporting of trench results, further regional surface work and any drone survey, the preparation, timing and outcome of the updated Mineral Resource estimate and NI 43-101 technical report, the Project’s exploration potential, statements attributed to the Company’s President and CEO, and geological and geophysical interpretations.

Forward-looking information is based on assumptions that, while considered reasonable by the Company, may prove to be incorrect. These include that the Company has sufficient funds to pay for the analysis of pending samples, that drilling, sampling and laboratory services remain available on acceptable terms, that required landholder permissions and other access rights will be obtained for planned work, that assay results are received and validated by the Qualified Person in a timely manner, and, for any further drilling, that the Company obtains the necessary financing.

Forward-looking information involves known and unknown risks and uncertainties, including equipment downtime, laboratory turnaround and operational delays, surface access and permitting, commodity prices and the availability of financing. It also involves the risks that drill results may not be representative of mineralization generally, that a single hole or a partly assayed hole may not be representative of a target, that pending assays may return lower grades or no mineralized intervals, that samples with possible free gold may return different grades on further testing, that geological interpretations may be revised as further data are received, that regional exploration may not identify additional mineralization, and that the updated Mineral Resource estimate may be delayed or may differ materially from the 2021 estimate in tonnage, grade, contained metal or classification. Any of these may cause actual results to differ materially. The Mineral Resource for the Project is classified as Inferred, with the limitations set out under “Mineral Resource” above. Readers are cautioned not to place undue reliance on forward-looking information. The Company disclaims any intention or obligation to update or revise forward-looking information, except as required by applicable law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.

Copyright (c) 2026 TheNewswire - All rights reserved.

© 2026 Canjex Publishing Ltd. All rights reserved.