01:27:33 EDT Fri 29 Mar 2024
Enter Symbol
or Name
USA
CA



Lomiko Metals Inc (2)
Symbol LMR
Shares Issued 348,257,837
Close 2023-05-03 C$ 0.025
Market Cap C$ 8,706,446
Recent Sedar Documents

Lomiko finds La Loutre material suitable for graphite

2023-05-03 18:23 ET - News Release

Ms. Belinda Labatte reports

LA LOUTRE GRAPHITE PROJECT PRODUCES HIGH-GRADE SPHERICAL GRAPHITE GRADING 99.99% C(T) IN LAB SCALE TESTING

Lomiko Metals Inc. has released results of the spherical graphite (SPG) lab-scale testing for its La Loutre natural flake graphite property, located approximately 180 kilometres northwest of Montreal in the Laurentian region of Quebec. La Loutre project is located within the Kitigan Zibi Anishinabeg (KZA) First Nation's territory. The testing was completed by ProGraphite in Germany on a 10.5-kilogram bulk flotation sample prepared by SGS Canada Inc. The 10.5-kilogram bulk flotation concentrate was generated during the preliminary feasibility study (PFS) metallurgical program and was dispatched to ProGraphite in Germany for micronization, spheroidization and purification testing to produce spheroidized and purified graphite (SPG), which is the needed material for the anode in electric vehicles (EVs).

Highlights of La Loutre project SPG lab-scale testing:

  • La Loutre material is suitable for the production of spherical graphite.
  • All physical characterization tests produced very good results such as narrow particle size distribution range and high tap density, and meet the target values for electric vehicle and other lithium-ion-based battery applications.
  • The company achieved continuous and reliable production of micronized products with homogenous properties, suggesting a relatively low specific energy input to convert La Loutre flotation concentrate to micronized material.
  • The particle size distribution for both grades is typical for spherical graphite.

In summary, independent bench-scale micronization and spheronization tests have demonstrated that La Loutre material is suitable for the production of spherical graphite. All physical data yielded very good results and meet the target values such as narrow particle size distribution and high tap density.

Belinda Labatte, chief executive officer and director, stated: "We are very pleased to achieve a high-purity SPG graphite from La Loutre graphite flotation concentrate. It is very encouraging to see that the lab-scale level of metallurgical testing shows that Lomiko can achieve a purity of 99.99 per cent graphitic carbon with a yield of approximately 55 per cent. We are looking forward to further purification testing and coating trials and the start of the battery trials in the next quarter. We believe this to be an important step in validating the geological and metallurgical potential of the deposit for a climate success story and directly feeding into the North American EV supply chain. We look forward to the next steps, including more fieldwork, and discussions with KZA First Nation and local communities."

The flotation concentrate was analyzed for the two most important characteristics of flake graphite concentrates, namely particle size distribution and carbon content. The results of the analysis are presented herein.

The loss on ignition (LOI) value of the flotation concentrate was high at 97.4 per cent (this is achieved by flotation only using a bulk sample produced by SGS).

A higher carbon content in the flotation concentrate is advantageous for subsequent purification as this normally results in lower operating costs and possibly even lower capital costs. The sieving also shows a positive result: Despite the high carbon content, the concentrate is relatively coarse with approximately 40 per cent flakes over 100 mesh.

Spheronization and purification

Typical production steps to obtain spherical purified graphite (SPG) are micronizing, spheronizing and purification.

The target size of two spherical graphite products was a d50 (50 per cent of the mass being smaller than a specific size) of approximately 15 microns and 20 microns, respectively.

The flowability of the feed material was good, and the micronizing throughput was on a rather high level, which suggests a relatively low specific energy input to convert La Loutre flotation concentrate to micronized material. It was possible to continuously produce micronized products with homogenous properties.

In addition to the particle size distribution, other physical characteristics were analyzed. The results are shown herein.

The specific surface area was measured with the BET method. For the spheronized graphite SPG20, it was analyzed at 7.4 square metres per gram, which is a normal value for material that was produced with a batch spheronizer. As expected, the BET value for the SPG16 of 8.20 square metres per gram is slightly higher since a smaller particle size corresponds to higher BET values.

The tap density, especially for the SPG20 (0.96 kilogram per litre) is very good for SPG material prior to coating. A high tap density is preferred as it results in batteries with higher capacities.

Typical yield levels for batch process are around 50 per cent, which were exceeded by La Loutre graphite at 55 per cent.

Purification testwork

Two purification methods were investigated on La Loutre SPG, namely alkaline and acid purification.

A total of 100 grams of the SPG20 spherical graphite were subjected to an intensive alkaline purification. The main chemical employed was sodium hydroxide (NaOH). An alkaline digestion at 250 C followed by a sulphuric acid (H2SO4) wash was carried out. The purified SPG material graded 99.97-per-cent LOI, which exceeded the minimum grade requirements of SPG material for electric vehicle application of 99.95-per-cent LOI.

The purified graphite ash was examined by an ICP analysis. The results of the ICP scan are presented herein.

The concentrations of all impurities were at very low levels, and concentrations especially of critical elements for use in batteries, such as iron, chromium, copper and silicon, are below the typical specification limits. The excellent values for Fe and Si confirm that the purification was very successful.

Two elements, namely sodium (Na) and calcium (Ca), were elevated. The higher sodium levels were likely linked to the NaOH digestion and can possibly be reduced significantly by further optimization of the purification process conditions.

The same SPG20 material that was subjected to alkaline purification was also used for the acid purification tests. The acid purification employs HF (hydrofluoric acid) as the main chemical due to its ability to dissolve most of the silicates and many other impurities. Minor portions of other acids were added as well.

A strong acid purification process with several steps was carried out to reach the battery-grade levels of purities. Material-handling properties of the SPG such as filtration were favourable. However, incinerating (ashing) of the purified graphite produced a white residue, and the purity was at 99.94-per-cent LOI. The results of an ICP scan that was performed on the acid-purified SPG20 material are presented herein.

The values for silicon and iron are very low, which indicates that the cleaning went well. However, it can be seen that the values for aluminum and magnesium are significantly higher. It is postulated that these elements were primarily responsible for the white ash. A second HF purification test with an increased acid concentration failed to reduce the elevated aluminum and magnesium concentrations.

It was then decided that two options should be explored to further reduce the contamination of impurities:

  1. Prepurification prior to HF purification with a mixture of hydrochloric and nitric acid;
  2. A posttreatment of the material that was purified with HF with sulphuric acid.

Both options produced very good results, and the white ash was no longer observed. The sample that was generated with posttreatment of the HF purified SPG20 material with sulphuric acid was incinerated and the ash/remining residue was submitted for an ICP analysis. The purified material graded 99.99-per-cent LOI, and the results of the ICP analysis are presented herein.

The concentrations of aluminum and magnesium were reduced by approximately 90 per cent and 97 per cent, respectively. Concentrations of other impurities such as calcium, iron and zirconium were also reduced noticeably.

Next steps

Parallel purification work will be conducted by Corem in Quebec City, where Corem will further upgrade the SPG material by carbon coating into coated, spheroidized and purified graphite (CSPG), which will then be evaluated in battery trials by Polaris Battery Labs. Complete test results are expected in late second quarter or early third quarter 2023. The company continues to actively work with partners in Quebec for battery trials as a next step.

The company's updated investor presentation and website can be found at the Lomiko website.

Qualified person

Oliver Peters, a principal metallurgist with Metpro Management Inc., is a qualified person within the meaning of National Instrument 43-101. Mr. Peters is satisfied that the analytical and testing procedures used are standard industry operating procedures and methodologies, and he has reviewed, approved and verified the technical information disclosed in this news release, including sampling, analytical and test data underlying the technical information.

About Lomiko Metals Inc.

The company holds mineral interests in its La Loutre project in Southern Quebec. La Loutre project site is located within the Kitigan Zibi Anishinabeg (KZA) First Nation's territory. The KZA First Nation is part of the Algonquin Nation, and the KZA traditional territory is situated within the Outaouais and Laurentides regions. Located 180 kilometres northwest of Montreal, the property consists of one large, continuous block with 76 mineral claims totalling 4,528 hectares (45.3 square kilometres).

The property is underlain by rocks belonging to the Grenville province of the Precambrian Canadian Shield. The Grenville was formed under conditions that were very favourable for the development of coarse-grained, flake-type graphite mineralization from organic-rich material during high-temperature metamorphism.

Lomiko published an April 13, 2023, updated mineral resource estimate (MRE), which estimated 68.2 million tonnes of indicated mineral resources averaging 4.50 per cent Cg per tonne for 3,072,000 tonnes of graphite, a tonnage increase of 195 per cent. Indicated mineral resources increased 45.01 million tonnes as a result of the 2022 drilling campaign, from 23.2 million tonnes in 2021 MRE with additional mineral resources reported downdip and within marble units resulting in the addition of 21.8 million tonnes of inferred mineral resources averaging 3.51 per cent Cg per tonne for 765,000 tonnes of contained graphite, and the additional 13,107 metres of infill drilling in 79 holes completed in 2022 combined with the refinement of the deposit and structural models contributed to the addition of most of the inferred mineral resources to the indicated mineral resource category, relative to the 2021 mineral resource estimate. The MRE assumes a $1,098.07-(U.S.)-per-tonne graphite price and a cut-off grade of 1.50 per cent Cg.

In addition to La Loutre, Lomiko is working with Critical Elements Lithium Corp. toward earning its 70-per-cent stake in the Bourier project as per the option agreement announced on April 27, 2021. The Bourier project site is located near Nemaska lithium and critical elements southeast of the Eeyou Istchee James Bay territory in Quebec, which consist of 203 claims, for a total ground position of 10,252.20 hectares (102.52 square kilometres), in Canada's lithium triangle near the James Bay region of Quebec that has historically housed lithium deposits and mineralization trends.

We seek Safe Harbor.

© 2024 Canjex Publishing Ltd. All rights reserved.