Mr. John Mirko reports
ROKMASTER SAMPLES 3.0 M AT 0.44% TUNGSTEN TRIOXIDE AT SELKIRK PROJECT
Rokmaster Resources Corp. has provided an update for its 100-per-cent-owned Selkirk project.
Selkirk comprises two mineral properties located north of Revelstoke in southeastern British Columbia. Selkirk has been steadily advanced by Rokmaster since 2021, with positive results generated from geological mapping, prospecting, channel sampling and soil sampling.
A small work program completed on the Downie gold property in 2026 returned high-grade tungsten over good intervals near the northern extent of the FIM skarn horizon.
The FIM skarn horizon is a 20-to-30-metre-thick skarn-altered (diopside-pyrrhotite-garnet) horizon developed in calcareous phyllite near the northeastern intrusive contact to the Cretaceous Long Creek stock. Metre-scale exposures of massive garnet-diopside skarn mineralization are concentrated near the base of the horizon, which strikes to the northwest and dips at approximately 40 degrees to the northeast. Fieldwork completed at Downie in 2025 confirmed tungsten mineralization near the southern end of the previously mapped FIM skarn horizon, which has a strike length of approximately 2.0 kilometres. For comparison of the tungsten grades, Almonty Industries Inc.'s flagship Sangdong mine in South Korea, historically one of the world's largest and highest-grade tungsten deposits, holds a probable mineral reserve of 8,579,000 tonnes at 0.42 per cent WO3 (tungsten trioxide) using a cut-off of 0.15 per cent WO3.
The company applied for an additional 422 hectares of mineral claims covering the northern contact of the Long Creek stock. Downie also hosts silver-gold-lead-zinc skarn, vein and replacement mineralization in the Melt and KJ zones, where a multiyear area-based (MYAB) exploration permit is currently approved.
John Mirko, chief executive officer and director, commented: "The FIM skarn horizon is extensive with a significant 2.0-kilometre strike length, which remains open, and 20-to-30-metre widths of skarn-related alteration, suggesting a large mineralized system. The high-grade tungsten collected from near the base of the FIM skarn horizon, returned widths and grades of tungsten comparable to other significant systems, some of which are now in production, as tungsten has seen rapidly rising demand for supply-chain security and defence readiness. I've been hunting tungsten in Southern B.C. since 1977 and this is the best potential I've seen."
Chip samples were collected using multiple hammers over measured intervals as perpendicular as possible to the strike and dip of the mineralized horizons and can be considered representative over their reported length; true thickness cannot be determined at this time. Samples were delivered to MSALABS for a preparation of crushing one kilogram to two millimetres, splitting 250 grams and pulverizing to 85 per cent to minus-75 micrometres and then subjecting to a 30-gram fire assay with AAS finish. All samples were subject to four-acid and ICP-MS finish for 48 elements, and those that returned greater than 1,000 parts per million W were sent for borate fusion with an XRF (X-ray fluorescence) finish to determine tungsten trioxide concentration.
The technical information in this news release has been prepared in accordance with Canadian regulatory requirements as set out in National Instrument 43-101 and reviewed and approved by Linda Caron, PEng, who is independent of Rokmaster.
We seek Safe Harbor.
© 2026 Canjex Publishing Ltd. All rights reserved.